김찬중 교수님 (kimcj@snu.ac.kr)
EDUCATION
B.S. 기계공학과, 서울대학교 (1983)
M.S. 기계공학과, 서울대학교 (1985)
Ph.D. Mechanical Engineering, University of Michigan (1991)
EXPERIENCES
Univ. of Michigan 박사 후 연구원 (1991~1992)
서울대 터보동력기계연구센터 연수 연구원 (1992~1995)
한국 과학기술연구원 기전연구부 위촉 연구원 (1995~1996)
한국 과학기술연구원 기전연구부 선임 연구원(1996~1997)
서울대학교 공과대학 기계항공공학부 조교수(1997~2001)
現) 서울대학교 공과대학 기계항공공학부 정교수
JOURNAL(2005~)
(1) B.K. Park, C.J. Kim, D.E. Kwon, and Y.W. Lee, 2020, Design and Fabrication of partially Foamed Grid Structure Using Additive Manufacturing and Solid State Foaming, PROCESSES, Vol. 8, pp. 1594.
(2) D.H. Jeon, J.H. Song, J.P. Hong, and S.H. Lee, 2019, Agglomeration of Li(NixMnCoz)O2 Particles in Couette-Taylor flow reactor, JOURNAL OF INDUSTRIAL, Vol. 76, pp. 524-531.
(3) S.M. Baek, A. Jung, J.H. Nam, and C.J. Kim, 2019, Three-dimensional micro/macroscale simulation of planar, anode-supported, intermediate-temperature solid oxide fuel cells: I. Model development for hydrogen fueled operation, Vol. 44, pp. 15456-15481.
(4) H.K. Kim, J.H. Choi, and K.J. Lee, 2019, A Numerical Study of the Effects of Cell Formats on the Cycle Life of Lithium Ion Batteries, Journal of The Electrochemical Soci ety, Vol. 166, A1769-1778.
(5) S.K. Kim, A. Jeong, 2019, Numerical Simulation of Crystal Growth in Injection Molded Thermoplastics based on Monte Carlo Method with Shear Rate Tracking, International Journal of Precision Engineering and Manufacturing, Vol. 20, pp. 641-650.
(6) A. Jeong, D.W. Shin, S.M. Baek, J.H. Nam, 2018, Effectiveness factor correlations from simulations of washcoat nickel catalyst layers for small-scale steam methane reforming application, Vol. 43, 15398-15411.
(7) H.K. Kim, C.J. Kim, C.W. Kim, and K.J. Lee, 2018, Numerical analysis of accelerated degradation in large lithium-ion batteries, Computer&Chemical Engineering, Vol. 112, pp. 82-91.
(8) S.G. Lee, M. Kaviany, C.J. Kim and J. Lee, 2017, Quasi-steady front in quench subcooled-jet impingement boiling: Experiment and analysis, International Journal of Heat and Mass Transfer, Vol. 113, pp. 622-634.
(9) D. Shin, S.M. Baek, J.H. Nam and C.J. Kim, 2016, Efficient microscale simulation of intermediate-temperature solid oxide fuel cells based on the electrochemical effectiveness concept, Computers & Chemical Engineering, Vol. 90, pp. 268-277.
(10) S. Sohn, S.M. Baek, J.H. Nam and C.J. Kim, 2016, Two-dimensional micro/macroscale simulation of intermediate-temperature solid oxide fuel cells considering the direct internal reforming of methane, International Journal of Hydrogen Energy, Vol.41(12), pp. 5582-8897.
(11) K.N. Kim, J.H. Kang, S.G. Lee, J.H. Nam and C.J. Kim, 2015, Lattice Boltzmann simulation of liquid water transport in microporous and gas diffusion layers of polymer electrolyte membrane fuel cells, Journal of Power Sources, Vol. 278, pp. 703-717.
(12) S.G. Lee, D.H. Jeon, B.M. Kim, J.H. Kang and C.J. Kim, 2013, Lattice Boltzmann simulation for electrolyte transport in porous electrode of lithium ion batteries, Journal of the Electrochemical Society, Vol. 160(4), pp. H258-H265.
(13) S.M. Baek, D.H. Jeon, J.H. Nam and C.J. Kim, 2012, Pressure drop and flow distribution characteristics of single and parallel serpentine flow fields for polymer electrolyte membrane fuel cells, Journal of Mechanical Science and Technology, Vol. 26(9), pp. 2995-3006.
(14) J.H. Kang, K.N. Kim, J.H. Nam and C.J. Kim, 2012, Visualization experiments and pore-network simulations for invasion-percolation transport of a non-wetting fluid through multiple porous layers, International Journal of Hydrogen Energy, Vol. 37(2), pp. 1642-1652.
(15) S.M. Baek, J.H. Nam, H. Hong and C.J. Kim, 2011, Effect of brine flow rate on the performance of a spiral-jacketed thermal storage tank used for SDHW systems: A computational fluid dynamics study, Applied Thermal Engineering, Vol. 31(14-15), pp. 2716-2725.
(16) S.M. Baek, S.H. Yu, J.H. Nam and C.J. Kim, 2011, A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs, Applied Thermal Engineering, Vol. 31(8-9), pp. 1427-1434.
(17) S.M. Baek, S.G. Koh, K.N. Kim, J.H. Kang, J.H. Nam and C.J. Kim, 2011, A numerical study on the performance of polymer electrolyte membrane fuel cells due to the variation in gas diffusion layer permeability, Journal of Mechanical Science and Technology, Vol. 25(2), pp. 457-467.
(18) S. Sohn, J.H. Nam, D.H. Jeon and C.J. Kim, 2010, A micro/macroscale model for intermediate temperature solid oxide fuel cells with prescribed fully-developed axial velocity profiles in gas channels, International Journal of Hydrogen Energy, Vol. 35(21), pp. 11890-11907.
(19) S.H. Bae, J.H. Nam, C.S. Song and C.J. Kim, 2010, A numerical model for freeze drying processes with infragreen radiation heating, Numerical Heat Transfer, Part A. Application, Vol. 58(5), pp. 333-355.
(20) K.J. Lee, J.H. Kang, J.H. Nam and C.J. Kim, 2010, Steady liquid water saturation distribution in hydrophobic gas-diffusion layers with engineegreen pore paths: An invasion-percolation pore-network analysis, Journal of Power Sources, Vol. 195(11), pp. 3508-3512.
(21) J.H. Kang, K.J. Lee, S.H. Yu, J.H. Nam and C.J. Kim, 2010, Demonstration of water management role of microporous layer by similarity model experiments, International Journal of Hydrogen Energy, Vol. 35(9), pp. 4264-4269.
(22) J.H. Kang, K.J. Lee, J.H. Nam, C.J. Kim, H.S. Park, S. Lee and I. Kwang, 2010, Visualization of invasion-percolation drainage process in porous media using density-matched immiscible fluids and refractive-index-matched solid structures, Journal of Power Sources, Vol. 195(9), pp. 2608-2612.
(23) K.J. Lee, J.H. Nam and C.J. Kim, 2010, Steady saturation distribution in hydrophobic gas-diffusion layers of polymer electrolyte membrane fuel cells: A pore-network study, Journal of Power Sources, Vol. 195(1), pp. 130-141.
(24) S.H. Yu, S. Sohn, J.H. Nam and C.J. Kim, 2009, Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells, Journal of Power Sources, Vol. 194(2), pp. 697-703.
(25) J.H. Nam, K.J. Lee, G.S. Hwang, C.J. Kim and M. Kaviany, 2009, Microporous layer for water morphology control in PEMFC, International Journal of Heat and Mass Transfer, Vol. 52(11-12), pp. 2779-2791.
(26) J.H. Nam, K.J. Lee, S. Sohn and C.J. Kim, 2009, Multi-pass serpentine flow fields to enhance under-rib convection in polymer electrolyte membrane fuel cells: Design and geometrical characterization, Journal of Power Sources, Vol. 188(1), pp. 14-23.
(27) K.J. Lee, J.H. Nam and C.J. Kim, 2009, Pore-network analysis of two-phase water transport in gas diffusion layers of polymer electrolyte membrane fuel cells, Electrochimica Acta, Vol. 54(4), pp. 1166-1176.
(28) H.J. Kim and C.J. Kim, 2008, A numerical analysis for the cooling module related to automobile air-conditioning system, Applied Thermal Engineering, Vol. 28(14), pp. 1896-1905.
(29) M.C. Kim, D.K. Kim, S.H. Lee, M.S. Amin, I.H. Park, C.J. Kim and M. Zahn, 2006, Dynamic characteristics of superparamagnetic iron oxide nanoparticles in a viscous fluid under an external magnetic field. IEEE transactions on magnetics, Vol. 42(4), pp. 979-982.
(30) D.H. Jeon, J.H. Nam and C.J. Kim, 2006, Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model, Journal of the Electrochemical Society, Vol. 153(2), pp. A406-A417.
(31) C.S. Song, J.H. Nam, C.J. Kim and S.T. Ro, 2005, Temperature distribution in a vial during freeze-drying of skim milk, Journal of Food Engineering, Vol. 67(4), pp. 467-475.
(32) D.H. Jeon, J.H. Nam and C.J. Kim, 2005, A random resistor network analysis on anodic performance enhancement of solid oxide fuel cells by penetrating electrolyte structures, Journal of Power Sources, Vol. 139(1-2), pp. 21-29.
서울시 관악구 관악로1 서울대학교 301동 1414호 전산열설계연구실 Tel.02-880-1656
Contact :ysoh90@snu.ac.kr